How do I install my Doona in the car?

You may find detailed instructions on How To install the Doona here:

  • In the user guide located at its designated slot at the back of the Doona or onour website. Europe: page 35. US: page 45.
  • For more information watch theHow To Use videos.

Can I install the Doona automobile seat in a forward facing position?

No. The Doona car seat intended for rearward facing just.

When using Doona in the auto, how should the Doona handle be positioned?

When installing the Doona in the car, with or without a base of operations, tilt the handle toward the vehicle seat in an anti-rebound position.

Can I install the Doona Machine Seat in the forepart seat of my car?

You lot may install the Doona car seat in the auto as long as you lot:

  • NEVER use the Doona Car Seat on a rider seat with an active frontal airbag!
  • NEVER install the Doona Car Seat on a rear-facing vehicle seat or on a side-facing vehicle seat.

How do I install the Doona in the car without the base?

For correct installation of Doona in the car delight refer to the User Guide:

User Guides

Europe: page 35.
Us: page 45.

How do I know if the shoulder straps are not as well tight for my baby?

A snug strap should not permit any slack. It lies in a relatively direct line without sagging. Information technology does not press on the child'southward flesh or push button the child's body into an unnatural position.

How to conform the shoulder straps pinnacle?

  • Disconnect the shoulder straps from the metal harness plate located at the dorsum of the motorcar seat.

  • Pull out the shoulder straps from the front and remove the shoulder strap pads from them.

  • Thread the shoulder straps through the appropriate shoulder strap slots. IMPORTANT! Shoulder straps must exist routed at the same peak or slightly below the child's shoulders.

  • Reconnect the shoulder straps to the metallic harness plate at the back of the car seat. Of import! Brand certain straps are not twisted.

  • Important! The shoulder straps, attached to the metal plate, MUST be routed BETWEEN the metallic bar and the seat trunk.

What is the correct height of the shoulder straps for my babe?

Ensure the shoulder straps are inserted through the shoulder strap slots at or just beneath the child's shoulders.

My baby is just a few months old and the harness straps feel also tight, what should I do?

  • Make sure that the harness straps, at the back of the Doona, are threaded between the Doona trunk and the metal bar.
  • Check if the baby has outgrown the Infant Insert and remove information technology.
  • Make sure the shoulder straps are not twisted.
  • Verify that the shoulder straps are threaded in the correct tiptop for the babe's shoulders.

The handle does not extend what should I practise?

The Doona handle is designed to prevent misuse, therefore information technology tin exist extended only when the handle is in rear facing stroller position.

To rotate the handle into a stroller style, press both white buttons simultaneously (located on both sides of the handles) and so rotate the handle to rear facing stroller position.

To extend the handle press the white button at the acme of the handle and and then pull the handle to towards you.

The handle does non rotate what should I do?

To rotate the handle, press both white buttons simultaneously (located on both sides of the handles) and then rotate the handle to the desired position.